During installation of the #2 engine starter/generator on a Falcon 50B and 50EX, there is a possibility of interference between the V-Band clamp and the starter/generator at the 12:00 position of the starter/generator (see photo). Dassault offers a new style V-Band clamp, p/n F50B258708130 with a relief notch that provides clearance to prevent the interference (chaffing).
Occasionally, Duncan Aviation technicians have found this new style V-Band clamp installed incorrectly with the notch not oriented correctly to prevent the chaffing. During your next inspection in this area, first look to see if this new style clamp is installed and if so make sure it is orientated to prevent this interference.
For questions about this or other Falcon technical issues, contact your Duncan Aviation Falcon Tech Rep.
|Bornhorst, Kevin - Airframe Tech Rep - Battle Creek, MI (BTL). Aviation professional since 1982.
Direct: +1 269.969.8482
|Goertzen, Mark - Airframe Tech Rep - Lincoln, NE (LNK). Aviation professional since 1975.
Direct: +1 402.479.1511
|Grose, Ron - Airframe Tech Rep - Lincoln, NE (LNK). Aviation professional since 1974.
Direct: +1 402.479.1640
Top Eight Questions Customers Have About Aircraft Paint
What Are The Honeywell TFE731 Inspection Intervals For New And Classic Engines?
Duncan Aviation Now Supports Honeywell NZ-2000 And IC-800 Computers
What Do You Do When A New 5-10 Task Is Introduced Into The Falcon Jet MPD?
4 Common Pitot Static Ramp Test Mistakes