The main landing gear inboard gear door aft stationary fairing is attached with standoff brackets seen in the attached pictures. These brackets (P/N FGFB242480121A2 RH or FGFB242480111A2 LH) have a tendency to crack if the aft door rubber bumper stop is out of adjustment.
F900 AMM work card 32-115 “adjustment of the main door” paragraph 5, gives instructions on adjustment of the door aft stop.
 |
 |
Important Inspection: Potential Corrosion Risk Near Falcon 900 Baggage Door Motor
Peace of Mind Beyond OEM Warranty: Why CASP is the Smart Choice for Avionics Protection
Falcon 2000EX Series: Service Bulletin Addresses 5G Radio Altimeter Interference Risks
Honeywell TFE731 N2 Monopole Improvement: SB Updates & Troubleshooting
Aircraft Engine Low Utilization Inspections (LUI): When They're Really Due