MENU

Honeywell HTF7500E Stator Vane Seal Inspection Program

March 2017

On February 14, 2017, Honeywell released the SIL (Service Information Letter) D201702000027, Revision 0, applicable to the AS907-3-1E (HTF7500E) model engine. 

This SIL announces the 1st and 4th Stage Compressor Stator Vane Seal Inspection Program.

This program is a result of isolated instances of individual rivets separating from the 1st and/or 4th stage high pressure compressor stator vane assemblies on engines with more than 850 hours. This is not a safety issue and no operational issues have been reported.

The details of the program, including borescope inspection intervals, will be further explained in the Service Bulletin AS907-72-9072 scheduled to be published in March 2017. No action needs to be taken at this time.

Contact

Shawn Schmitz Engine Tech Rep Astra, Challenger, Citation, Embraer, Falcon, Global, Gulfstream, Hawker, King Air, Learjet, Westwind Lincoln, NE (LNK) +1 402.479.8166

Related Tech Articles

What edge sealer should be used on your Collins Aerospace Goodrich® pneumatic de-icers?
March 2021


HAS YOUR AIRCRAFT SPARES INVENTORY REACHED ITS SHELF LIFE?
June 2021


Talking To The Principal About Comparing Quotes
February 2021


Honeywell Releases Service Bulletin To Replace No. 6 Bearing Oil Supply Tubes on TFE731 Engines
January 2021


Falcon 7X: Pratt & Whitney Fan Blade Lubrication Requirement
December 2020


View All Engine & APU Embraer Tech Articles